Producer in Media Studio helps live video creators broadcast high-quality content to from external sources like streaming software, hardware encoders, and professional cameras.
NEW: Try 's Live Studio platform for a completely redesigned livestreaming experience.
Producer in Media Studio allows live video content creators to easily create high-quality broadcasts from external sources including streaming software, hardware encoders, and professional cameras.
These broadcasts are viewable from on iOS and Android, and on desktop.
Past broadcasts are also viewable directly within the Producer application. If you linked your Periscope information to your account, you will be able to view the library of your broadcasts made from the various apps, Periscope Producer, or the API. For details on monetizing broadcasts and analytics, visit the Media..com.
To get the best out of your experience with Producer in Media Studio, here are some terms to know:
A videosource needs to be created before you are able to ingest video and broadcast live on . You can also reuse one or more sources in your account to simplify your broadcasting experience as has a limit of 100 sources. If you reach this limit, try deleting sources that are no longer needed to free up space in your account.
Content created with the intent to be viewed as a scheduled broadcast requires a source that is created from Media Studio Producer.
Broadcasts are how most people on will be viewing your live video. Once a source has been made, you can create broadcasts, which are how people on will view your live video. You can broadcast live right away or schedule a broadcast to happen in the future. You can also create private broadcasts to use for creating clips within LiveCut.
To go live via Producer in Media Studio, we support RTMP and HLS. Follow each of the instructions below to create a source and begin broadcasting live on .
Please follow the stream specifications recommendations below for the best experience.
Audio codec: AAC-LC
Audio bitrate: 128kbps (maximum)
Video codec: H.264/AVC
Video bitrate:
Keyframe interval
Every 3 seconds
Wirecast:
Additional HLS requirements and specifications can be found here.
Choose the region that is closest to the source location of your encoder:
Asia Pacific (Tokyo) - Tokyo, Japan
Asia Pacific (Seoul) - Seoul, South Korea
Asia Pacific (Mumbai) - Mumbai, India
Asia Pacific (Singapore) - Singapore, Singapore
Asia Pacific (Sydney) - Sydney, Australia
EU (Frankfurt) - Frankfurt, Germany
EU (Ireland) - Dublin, Ireland
EU (Paris) - Paris, France
South America (São Paulo) - São Paulo, Brazil
US East (N. Virginia) - Northern Virginia, USA
US West (N. California) - Oregon, USA
US West (Oregon) - Northern California, USA
This is a more secure URL, adding an extra layer of security on the stream as it gets sent to .
Can I use authentication for my RTMP connection?
No, we do not support authentication for RTMP connections.
Can I change the location of my RTMP source after creation?
No, but you may create a new source and delete old ones.
has a limit of 100 sources. If you reach this limit, clicking the button to create a source will not result in a new source being created, however no error message will appear. You can re-use existing sources and delete sources that are no longer needed to free up space in your account.
We recommend ‘Main’ or ‘High’ though whichever encoder you use, we highly recommend creating test broadcasts to determine the quality you wish to use.
No, it is not possible to re-use these existing streams. There must be a separate stream published to a source in Media Studio in order for us to properly ingest the video content.
There are third-party services that can ‘split’ one stream in order to send it to multiple RTMP points across different platforms. These services can be used to publish live video to Producer in Media Studio.
If you have previously used Periscope Producer, you may already see sources listed in this view.
Producer in Media Studio accepts HLS streams in the form of .m3u8 or .m3u URLs. When specifying an HLS stream URL in ’s Media Studio, you are specifying a URL to a playlist. We accept both types -- so-called ‘master playlists’ and ‘media playlists’.
Producer in Media Studio will automatically select a video variant, and if audio is not multiplexed together with video, an audio variant from your ‘master playlist’ using the following logic: the video variant with highest bitrate and resolution such that the resolution is 720p or lower, unless the only video variants available are above 720p video, where the variant closest to 720p will be chosen.
If audio and video are multiplexed together and separate audio renditions are provided, we will use the audio in the chosen video variant. If multiple AAC audio tracks are provided, we choose the audio track included in the rendition with the highest bandwidth.
Choose the region that is closest to the source location of your encoder:
US West (N. California) - Oregon, USA
US East (N. Virginia) - Northern Virginia, USA
EU (Frankfurt) - Frankfurt, Germany
Asia Pacific (Tokyo) - Tokyo, Japan
If you have a restricted HLS URL (by IP or geo-restriction), you may be able to use it in Media Studio by allowlisting all of the IP addresses that may attempt to read your stream. These IPs are specific to the source region that you choose, so they may be different across different sources. To view these IPs, go to the Sources tab and click into your HLS source. Expand the ‘Recommended encoder settings’ and scroll down to the ‘IP range’ field.
For live broadcasts on , we ignore variants that don't work for us (bad codecs and too high bitrate), and then choose the variant with the highest resolution as long as it's 1280x720 or lower.
Within LiveCut, the editor may display a lower-quality variant, even if you are ingesting a higher-quality stream.
The live window (the set of media segments listed in each update of the media playlist) should contain at least 5 segments and not more than 100 segments.
If the live window is shorter, it’s possible that due to network latencies a segment may leave the window before our system has a chance to download it. This may cause the broadcast on to skip or stop playing the portion of your stream corresponding to the missed segment(s). Please ensure your media playlist contains a minimum of 5 segments and does not exceed 100.
Otherwise ensure your HLS stream matches our recommended specifications, as any deviations can result in various issues on and in LiveCut.
Your stream’s HLS audio must be AAC-encoded. The audio must be mono or stereo audio, not multichannel.
The HLS URL must start with http or https and end with an .m3u8 or .m3u extension. Your URL will look something like this: https://[yourHLSstream].m3u8. If you are not sure if you have a supported stream, please contact your IT or video production team.
Ensure the HLS URL is entered correctly in the Source and that it is currently live. If you continue to receive this error, please contact the team managing your stream.
Ensure the HLS URL is entered correctly in the Source and that it is currently live. If you continue to receive this error, please contact the team managing your stream.
The stream is not accessible due to either geo-restrictions or authentication on your stream set by your IT team. If you continue to receive this error, please contact the team managing your stream (error 401 or 403).
There is currently no video detected on this stream URL. Ensure the HLS URL is entered correctly in the Source and that it is currently live. If you continue to receive this error, please contact the team managing your stream (error 404).
There is an issue with the HLS manifest or playlist. If you continue to receive this error, please contact the team managing your stream and reference the recommended HLS specification.
The stream is not accessible due to a server error. If you continue to receive this error, please contact the team managing your stream (error 500).
When creating a new broadcast, scroll down to the ‘Recommended encoder settings’ dropdown, which will show your encoder settings compared to ’s recommended specifications. Modify your encoder to be within the recommended specifications before creating your broadcast.
This field is only used for broadcasts being monetized in the Amplify Pre-roll program as a way to match your content with relevant advertisers. When the field is used for non-monetized, organic broadcasts, the set category is neither used nor shown on .
Stream encryption adds an extra layer of security on top of the streamed broadcast as it plays back on . Stream encryption is automatically turned on (and cannot be unselected) for broadcasts that have geo-restrictions in place.
Checking this box will prevent replays of a broadcast from being shown on . If this box is checked before or during a live broadcast, all users will see a gray screen upon the ending of the broadcast (may take up to a minute to reach all viewers). You will not be able to make clips in LiveCut when a broadcast replay is unavailable. This box can be checked or unchecked at any time, allowing or disallowing the playback of the broadcast.
Yes, you can include or exclude as many countries as needed, however there is no way to input more than one country at a time.
Public broadcasts can be viewed by anyone on (unless the broadcast is geo-restricted). Private broadcasts are only viewable by the user logged into Media Studio, as its primary use is to be used for broadcasts that should not be public, but will be used to create clips using LiveCut.
No, it is not possible to post a private broadcast, as it is only visible within Media Studio.
No, these features are only available for users within Media Studio.
There is no limit to how long you can stream on . However, the longer you stream, the more likely you are to face issues in replays, slow loading of your broadcast, and within LiveCut.
To restrict the playback on use the ‘Geo-restrictions’ settings when creating your broadcasts, and then you may remove the restrictions after going live.
We have set the maximum date that can be scheduled in advance at one-year in the future.
Broadcasts scheduled to Start later are restricted to a six (6) hour maximum duration. Broadcasts that Start immediately do not have a maximum duration.
Yes, you can edit the start and end times of a broadcast before it goes live. Once a broadcast is live, you can edit only the “Ends” field, either to end the broadcast early, or extend the end time to a maximum of six (6)hours.
Yes, you can post any scheduled broadcast, as long as its audience setting is “Public”. The post for a scheduled broadcast will contain the image you uploaded during broadcast creation. Include information about the scheduled date and time within your post text to ensure users tune-in at the right time.
It may take up to 30 seconds for a scheduled broadcast to show live video once the scheduled broadcast starts. During this time, you may see the generic poster image or your custom poster image.
You are able to upload various sizes and resolutions, though we recommend a 16:9 aspect ratio image with a resolution of 1280x720 or 1920 × 1080. Other aspect ratios and resolutions will be automatically cropped within the broadcast card when posted.
You can only have one broadcast live at a time on a single source. If you attempt to create an overlapping broadcast on a source that is already in use, or will be in use, you will get a warning message. In order to go live with multiple broadcasts at the same time, create and use multiple sources and encoders.
Scheduled RTMP broadcasts will go into the TIMED OUT state immediately, which means your broadcast will automatically End. HLS broadcasts will go into the TIMED OUT state after 10-minutes of attempting to connect to the HLS URL. If your scheduled broadcast was posted, viewers may see an error message.
If your followers have turned on notifications for your live video content, notifications are sent out once the broadcast goes live at its scheduled start time.
Scheduled broadcasts will start within the first few seconds of their scheduled start time in Media Studio.
This can appear when creating a scheduled broadcast. Scheduled broadcasts require the use of a source created within Media Studio. If you receive this error, you are likely utilizing a source that was originally created within Periscope. Please use a different source or create a new source within Media Studio.
This can appear in the broadcast preview player. This warning most often appears when you have not yet selected a source and/or when the source has not received your encoding signal.
This can appear in the broadcast preview player. This warning most often appears when your source is not able to detect a signal. The preview player will automatically refresh every few seconds as it continues to pull new information in from the source.
This can appear when creating a broadcast. This error may appear when Producer in Media Studio thinks there is another broadcast running on the selected source. If that is true, end the other broadcast and attempt to create a new one. If you continue to encounter this error message, create and use a new source.
This can appear when creating a broadcast. First, attempt to create the broadcast again. If you continue to encounter this error message, refresh the page, close and restart the browser, use a different browser, try a different computer, and/or create and use a new source.
If you are still unable to make a new broadcast with a new source, there may be a copyright violation associated with your account; please reach out to your account manager for assistance. You can also read more about our copyright policy here.
There is a date filter functionality on the top-right of the broadcast list. Use this to specify a desired date range during which broadcasts were created.
You can also sort by All, Live, and Ended broadcasts to give more granularity to your date range selection.
What do the labels mean in the Broadcast list?
LIVE - Broadcasts occurring now
SCHEDULED - Broadcasts set to start in the future
ENDED - Broadcasts that have already occurred
TIMED OUT - Broadcasts were automatically ended because the Source was no longer able to detect a signal; these broadcasts cannot be restarted
RECURRING - Broadcasts in a repeating scheduled series
There is a date filter functionality on the top-right of the broadcast list. Use this to specify a desired date range during which broadcasts were created.
You can also sort by All, Live, and Ended broadcasts to give more granularity to your date range selection.
Within Media Studio, you can make changes to the broadcast replay availability, geo-restrictions and set a custom start time for your replay.
If you created the broadcast with geo-restrictions, modifying those settings while the broadcast is live will take a few minutes to go into effect. If you created the broadcast without any geo-restrictions and then apply them while the broadcast is live, those restrictions will take a few minutes to go into effect on .
Clicking into a broadcast will show the Broadcast details window, which has a URL for the broadcast. As long as the broadcast is not ‘private’, any user can post this URL at the end of the post, which will appear as a broadcast player on .
You can also click on Edit access to account in your account dropdown menu to grant other handles permission to work within and/or on your behalf in Media Studio.
If you delete a broadcast, all existing posts that include the broadcast will now show error messages to viewers. We recommend deleting all posts from your account that include the broadcast.
Keep in mind, deleting a broadcast will remove your ability to see analytics. To be able to keep seeing your analytics, we recommend using the ‘Make broadcast replay unavailable’ checkbox.
No, it is not possible to download an entire broadcast in Media Studio. If you’re just looking to choose specific parts of broadcast, you can use LiveCut in order to make clips, which are downloadable. You can download all of your broadcasts on via your data archive. It’s not possible to download individual broadcasts from your account. We’re in the process of making changes to currently stored broadcasts.
Within Producer in Media Studio, you may experience the following issues:
These are symptoms that may be related to a copyright violation associated with your account. Read about our copyright policy and what to do when your content may have been removed from here.
When a broadcast with captions, or subtitles, is viewed on , the captions will appear as an overlay atop the broadcast. By default, captions appear when the broadcast’s sound is not playing, and will be hidden when sound is playing. Some users may have captions enabled within their device’s accessibility settings—if this is the case, then captions will always show, regardless of whether audio is on or if full-screen view is in use.
The current limit for having an active chat is 5000 concurrent viewers watching; once that threshold is crossed, chat is temporarily turned off. If concurrent viewers drop below 5000, the functionality will return.
Once posted, the title of your broadcast will appear on the post details page under the broadcast player. It will not appear when the post is viewed on the timeline.
Yes, we do allow embedding of broadcasts outside . After your broadcast is posted to , copy the post URL and paste it into publish.x.com and select the option for Embedded Video to receive the embed code.
This can appear when attempting to end a broadcast. This is likely just a temporary issue; try ending the broadcast again after some time.
This can appear when attempting to delete a broadcast. This is likely just a temporary issue; try deleting the broadcast again after some time.
This can appear when attempting to modify an existing broadcast. This is likely just a temporary issue; try updating the broadcast again after some time.
This can appear on when your broadcast is viewed in a post. It usually appears when there are connectivity or internet bandwidth issues (usually in the form of not receiving enough frames) between the sending encoder and your source. Check your internet bandwidth and compare your encoder settings to what is shown in the ‘Recommended encoder settings’ dropdown within your broadcast details window.
If you have previously used Periscope Producer, you may already see sources listed in this view.
Producer in Media Studio accepts HLS streams in the form of .m3u8 or .m3u URLs. When specifying an HLS stream URL in ’s Media Studio, you are specifying a URL to a playlist. We accept both types -- so-called ‘master playlists’ and ‘media playlists’.
All broadcast analytics for Media Studio are specific to platforms, including .com and the iOS and Android applications and exclude logged-out and web embed datas.
The following metrics can be found within Producer in Media Studio: minutes watched (live and replay), views (live and replay), live viewers, maximum concurrent live viewers, viewership percentage by device type, and viewership percentage by country.”
Check that you have not used the ‘hide’ functionality within the Periscope app. Unhide your broadcast via the app again to show broadcast analytics in Media Studio. If you do need your broadcast hidden from replay view, please use the ‘Make broadcast replay unavailable’ functionality in Media Studio.
There are many reasons why the data across the two sources will not match:
The Views metric seen on the broadcast player on x.com and apps use an older measurement that does not include MRC viewability metrics of 2s at 50% pixels, but does include views from logged out users and external embeds of the broadcast, which differs from Media Studio metrics.
Broadcast player views on web and web embeds are also tracked as “public” views. This means they do not show up as identifiable logged in accounts, even though they count towards the total views count. Views are counted on autoplay videos once a broadcast has been playing for 3 seconds as is consistent with autoplays. For all non-autoplay broadcasts, we track viewership when someone clicks into the broadcast.
As platform metrics are updated, they are continually analyzed and scrutinized to ensure viewership metric thresholds do not change over time.
The main Media Studio video view metric is triggered when a user watches a video for at least 2 seconds and sees at least 50% of the video player in-view. This applies to View metrics for both uploaded videos and live broadcasts. Media Studio metrics are inclusive of logged-in views only and do not include logged out and web embeds data.
When viewing your broadcast analytics in Producer in Media Studio, you will see a small note that says “it could take up to 3 hours for final viewership numbers to be published.” This is because all viewability metrics shown in Media Studio go through spam and normalization filters, ensuring more trustworthy data. It is possible that initially you may see slightly higher numbers across your broadcast metrics, then lower numbers later; this is because of the filters, and 3 hours is the approximate time it takes to ensure the data is correct.
There are no spam and normalization filters for broadcast player metrics, so you may see much higher broadcast player metrics for your broadcasts when compared to Producer in Media Studio.
We recommend focusing on the analytics found in Producer in Media Studio because of the many reasons highlighted in the question above. If you are mainly looking at your broadcast player data, it should be viewed as approximate data only, and should not be compared to, or aggregated with, data from Producer in Media Studio.
Across the various platforms we show broadcast metrics directly within posts with broadcasts. When a broadcast is live, we show approximate live views. When a broadcast is over and goes into the replay state, we show the approximate total views, again determined by broadcast player calculations. These numbers are approximate, not exact, and thus may not match the normalized and filtered data found in Producer in Media Studio.